Step-by-Step Guide- How to Professionally Install a Front and Rear Dash Cam in Your Vehicle

How to Install Dash Cam Front and Rear

Installing a dash cam front and rear can provide you with a comprehensive view of your vehicle’s surroundings, enhancing both safety and security. Whether you’re looking to record evidence in the event of an accident or simply want to have a permanent record of your drives, a dual dash cam setup is an excellent choice. In this article, we will guide you through the process of installing a dash cam front and rear, ensuring a seamless and efficient setup.

1. Choose the Right Dash Cam System

Before you begin the installation process, it’s essential to select the right dash cam system. Look for a dual dash cam that offers high-quality video recording, night vision capabilities, and a wide field of view. Additionally, consider features such as parking mode, GPS tracking, and G-sensor for impact detection.

2. Gather the Necessary Tools

To install your dash cam front and rear, you’ll need a few essential tools. These include a screwdriver set, a drill and drill bits, a pair of scissors, electrical tape, and a pair of gloves. Ensure you have these tools on hand before starting the installation process.

3. Position the Front Dash Cam

Start by positioning the front dash cam on your windshield. Choose a location that provides a clear view of the road ahead and doesn’t obstruct your vision. Most dash cams come with a suction cup mount that can be attached to the windshield. Ensure the mount is clean and dry before attaching the dash cam.

4. Connect the Power and Video Cables

Next, connect the power and video cables to the front dash cam. The power cable is usually designed to plug directly into your vehicle’s cigarette lighter socket or a 12V power outlet. The video cable should be connected to the front camera’s video output.

5. Position the Rear Dash Cam

Similar to the front dash cam, position the rear dash cam on your rearview mirror or dashboard. Again, choose a location that provides a clear view of the rear of your vehicle. Most rear dash cams come with a mounting bracket that can be attached to the rearview mirror or dashboard using screws.

6. Connect the Rear Dash Cam to the Front Dash Cam

Now it’s time to connect the rear dash cam to the front dash cam. This is typically done using a video cable. Ensure the video cable is securely connected to both the rear and front dash cam’s video inputs.

7. Connect the Power and Video Cables to the Front Dash Cam

Connect the power and video cables from the rear dash cam to the front dash cam. The power cable should be connected to the same power source as the front dash cam, while the video cable should be connected to the rear camera’s video output.

8. Test the Dash Cam System

Once all the connections are made, turn on your vehicle and test the dash cam system. Ensure both the front and rear cameras are recording clear, high-quality video. If everything is working correctly, proceed to the next step.

9. Secure the Dash Cams

Finally, secure the dash cam system in place. Use the included screws and mounts to ensure the cameras are firmly attached to your vehicle. Additionally, use electrical tape to secure any exposed cables to prevent them from getting in the way.

Congratulations! You have successfully installed a dash cam front and rear in your vehicle. With this dual setup, you can now enjoy enhanced safety, security, and peace of mind while on the road.