How to Install Duralast Windshield Wipers- A Step-by-Step Guide for a Clear Drive

How to Install Duralast Windshield Wipers

Installing new windshield wipers is a simple task that can be done by anyone with basic tools and a little bit of patience. Duralast windshield wipers are known for their durability and effectiveness, making them a popular choice among car owners. In this article, we will guide you through the process of installing Duralast windshield wipers on your vehicle.

Materials Needed

Before you begin, gather the following materials:

– Duralast windshield wipers
– Wiper blade installation tool (if not included with the wipers)
– A clean cloth
– Gloves (optional)

Step 1: Prepare Your Vehicle

Park your vehicle in a well-lit, shaded area. Make sure the engine is turned off and the vehicle is in park with the parking brake engaged. This will prevent any accidental movement while you are working on the wipers.

Step 2: Remove the Old Wipers

Locate the mounting bracket for the old wipers. Most vehicles have a clip or a small lever that holds the wiper arm in place. Gently release the clip or lever, and pull the wiper arm away from the windshield.

Step 3: Remove the Wiper Blade

With the wiper arm removed, you will see the wiper blade attached to the arm. Most Duralast wiper blades have a tab or a small clip that needs to be released. Use your fingers or the wiper blade installation tool to push the tab or clip upwards, releasing the blade from the arm.

Step 4: Install the New Wiper Blade

Take the new Duralast wiper blade and align it with the wiper arm. Push the blade into the arm until you hear a click, indicating that it is securely attached. If the wiper blade comes with a tab or clip, make sure to engage it properly.

Step 5: Reattach the Wiper Arm

Place the wiper arm back onto the mounting bracket, ensuring that it is aligned correctly. Re-engage the clip or lever that holds the arm in place. Test the wiper arm by moving it back and forth to make sure it is securely attached.

Step 6: Repeat for the Other Side

Repeat steps 2 through 5 for the other side of the windshield.

Step 7: Test the New Wipers

Start your vehicle and turn on the windshield wipers to ensure they are working properly. The new Duralast wipers should move smoothly across the windshield without any issues.

Conclusion

Installing Duralast windshield wipers is a straightforward process that can be completed in less than 30 minutes. By following these simple steps, you can enjoy clear visibility during rain or snow, keeping you and your passengers safe on the road. Always remember to check the condition of your wipers regularly and replace them when necessary to maintain optimal performance.